Sliding Shoe Sorter is a product for sorting items, which can quickly, accurately and gently sort items to different outlets according to the preset destination. It is a high-speed, high-efficiency, high-density sorting system for items of various shapes and sizes, such as boxes, bags, trays, etc.
The maintenance of Sliding Shoe Sorter mainly includes the following aspects:
• Cleaning: Regularly use a soft brush to remove dust, oil stains, water stains, etc. on the machine, keep the machine clean and dry, and prevent corrosion and short circuit. Do not blow with compressed air to avoid blowing debris into the inside of the machine.
• Lubrication: Regularly add oil to the lubricating parts of the machine, such as bearings, chains, gears, etc., to reduce friction and wear and prolong service life. Use a suitable synthetic oil or grease such as Permatex, Superlube, Chevron Ultra Duty, etc. and apply a thin film of oil.
• Adjustment: Regularly check the working parameters of the machine, such as speed, flow, split point, etc., whether they meet the standard requirements, and adjust and optimize in time. Use suitable conveyor belts and skids for proper diversion according to item size and weight.
• Inspection: Regularly inspect the safety devices of the machine, such as limit switches, emergency stop buttons, fuses, etc., whether they are effective and reliable, and test and replace them in time. Use quality inspection equipment, such as weight detectors, barcode scanners, etc., to perform quality inspections on sorted items.
The problems and solutions that the Sliding Shoe Sorter may encounter during use are mainly as follows:
• Item diversion is inaccurate or incomplete: the sensor or control system may be faulty and needs to be checked to see if the sensor or control system is functioning properly. It may also be that the item is too light or too heavy, and the diversion strength or speed needs to be adjusted.
• Items slipping or accumulating on the conveyor belt: The conveyor belt may be slack or damaged and needs to be adjusted or replaced. It may also be that the item is too small or too large, and the item spacing or diversion angle needs to be adjusted.
• Items get stuck or fall at the exit: the pulleys or conveyor belt at the exit may be faulty and need to be checked for proper functioning of the pulleys or conveyor belt. It may also be that the layout of the exit is unreasonable, and the height or direction of the exit needs to be adjusted.
• Sliding shoe stuck or falling off the conveyor belt: The shoe may be worn or damaged and needs to be replaced with a new one. It may also be that the gap between the shoe and the conveyor belt is not suitable, and the gap between the shoe and the conveyor belt needs to be adjusted.
Post time: Jan-12-2024